HomeMy WebLinkAbout18-0054 296 Falls Ave W Dumb Waiter Permit CITY OF
Project Type: Commercial Building Permit 'I`VVIN FAL[.s Applied Date: 07/1012018
Permit Type: Commercial Remodel Issued Date: 01/25/2018
�oACe 4;0
SeRv�NG Q
Permit No.: 18-0054
Address: 296 Falls Ave W
Owner Name: Csi-Heat Start Contractor: Fredricks Builders
296 Falls Ave W 3514 N 3200 E
Twin Falls ID 83301 Twin Falls ID 83301
208-589-5790 Phone: 208 421-0758
Contractor License/Registration# RCT-25319
Permit Information
Description of Work Remodel For Dumb Waiter
Property Location in City Limits Y
Lot Number 49
Block Number
Subdivision Name Orchalara Subdivision
Number of Units 1.00
Sq.Ft.First Floor
_ Sq.Ft.Second Floor
Sq.Ft.Basement Finished
Sq.Ft.Basement Unfinished
Sq.Ft.Garage
Sq.Ft.Patio
_Project Value 15,000.00
Impact Fee Type N/A
Fee Date Description Qty/Hrs Fee City Amount Total
COMMENT TEX Waived
01/10/2018 Permit Fee Commercial City 15,000.00 No 225.50 225.50
01/10/2018 Plan Review Fee Comm.City No 146.58 146.58
Total Fees: 372.08
Payment Amount: 372.08
Amount Due: 0.00
This permit is not transferable(between contractors)and becomes null and void if work is not commenced within 180 days or is
abandoned for a period of 180 days.
Property Owners: By signing this form you are certifying that you are the legal owner and will personally perform the work covered by
this permit. You recognize that this permit is only valid for the work on a primary or secondary residence and associated
outbuildings not used for commercial purposes. By signing this,you accept responsibilitly for all work being performed,and
understand that all work must be inspected by the City of Twin Falls, Building Department.
Any work in the right-or-way requires a seperate permit from the Engineering Department. Please contact them at 208-735-7248.
Inspect' n Line Phone Numbers:
Bui ing: 2 J- 3 Ele ri aL 208-7 47235 Mechanical:208-735-7289 Plumbing:208-735-7299
Signature: A ' Date: /
CITY OF
Project Type: Commercial Building Permit `WIN FALLS
Applied Date: 01/10/2018
Permit Type: Commercial Remodel
�oA�F SERVING Q�0
Building Permit Application
Address: 296 Falls Ave W Permit No.: 18-0054
Owner Name: Csi-Heat Start Contractor: Fredricks Builders
296 Falls Ave W 3514 N 3200 E
Twin Falls ID 83301 Twin Falls ID 83301
208-589-5790 Phone: 208 421-0758
Contractor License/Registration# RCT-25319
Permit Information
Property Location in City Limits Y
Lot Number 49
Block Number
Subdivision Name Orchalara Subdivision
Number of Units 1.00
Sq. Ft. First Floor
Sq. Ft. Second Floor
Sq. Ft. Basement Finished
Sq. Ft. Basement Unfinished
Sq. Ft. Garage
Sq. Ft. Patio
Project Value 15,000.00
Impact Fee Type N/A
Fee Date Description Qty/Hrs Fee City Amount Total
Waived
01/10/2018 Permit Fee Commercial City 15,000.00 No 225.50 225.50
01/10/2018 Plan Review Fee Comm. City No 146.58 146.58
Total Fees: 372.08
Payment Amount: 0.00
Amount Due: 372.08
Building Permit Application Only - This is not an approved permit
This application is not transferable and becomes null and void if work is not commenced within 180 days.
Property Owners: By signing this form you are certifying that you are the legal owner and will personally perform the work covered by
this permit. You recognize that this permit is only valid for the work on a primary or secondary residence and associated
outbuildings not used for commercial purposes. By signing this, you accept responsibilitly for all work being performed, and
understand that all work must be inspected by the City of Twin Falls, Building Department.
Signature: Date:
CITY OF
TWINFALTS City of Twin Falls
w Building Department
F y � 324 Hansen Street East
Phone:208-735-7238
P.O. Box 1907 Fax:208-736-2256
SCRvN° Twin Falls, ID 83303-1907
www.tfid.org
Commercial Building Permit Application
Type of Permit Requested Date Received:
❑Commercial Site Plan-Buildable Lot Land Use:
❑New Complete Building ❑Multi-Family(3 or more units) Number of Units
[]Shell Building-No Interior walls(no occupancy) ❑Addition Sq.Ft.
❑Shell Building-with interior walls(no occupancy) R]Remodel Total Cubic Feet •'
❑Tenant Improvement in Shell Building ❑Other ("Fire District Only")
PROJECT INFORMATION
Project Address:l0 F� S l +Cl� �� S Subdivision:
Business/Tenantusmg space: � Lot/Block:
Phone: Parcel#:
PROPERTY OWNER INFORMATION CONTRACTOR INFORMATION
Name: Business Name:
Address: Q ��
Address: 35-1
City,State,Zip:'- City,State,Zip:
Phone Fax: C� Phone:
Fax: Fax:
Email:
Email: 4,qi4t L •�c
State Registration#
&Expiration Date:
ARCHITECT INFORMATION ENGINEER INFORMATION
Business Name: Business Name: JE ff �� S
Contact Name: Contact Name: h L
Address: Address: Q
City,State,Zip: City,State,Zip:
Phone: �
Phone:( 3e '9—
Fax: Fax��a
Email: Email: �' e
ADDITIONAL CONTACTS: Project Manager, etc
Business Name: Business Name:
Contact Name: Contact Name:
Address: Address:
City,State,Zip: City,State,Zip:
Phone: Phone:
Fax: Fax:
Email: Email:
1. Projec ri ion:
2. Project Value � Q
A. Project Value is used to calculate fees for the building permit. Project Value is the total value of the construction work
for which the permit is issued,including overhead and Profit as well as finish work,painting,roofing,electrical,
plumbing,heating,air conditioning,elevators,fire extinguishing systems,other permanent equipment,and owner
supplied items. Project value excludes the value of the land.
I certify that the value&scope of work provided;ig
ve re the mos 'ccurate availab a at this time:
1
Print Name nature Date
3. Planning&Zoning Information
A. Land Use Zone: E. Warranty Deed
B. Site Drainage Area with Calcs F. Flood Plain
C. Landscaping Area G. Water Tap Size
D. Parking Spaces H. Sewer Tap Size
4. Building Information
A. Proposed Use E.Tenant Improvement Area:
B. Occupancy Groups: F.Total Existing Building Area:
C. Construction Type: G. Actual New Building Area:
D. Building Height: H. Number of Stories:
5. Fire Information
***Attach a site-specific letter from the engineering department or other public water provider stating fire flow at hydrants.
Include static pressure if fire sprinklers are to be installed.***
A. Fire Flow:
B. Static Pressure:
C. Is there a fire alarm system? L_JYeSL_JNo Partial
D. Is the building fully fire sprinkled?
If yes,will the sprinklers be used for:
Allowable Area Increase? DYesOVo
Story Increase? DYesOvo
Fire-resistive Substitution? =Yes ONo
If partially sprinklered,where?
E. Are there any classified areas? 1--Yes [�No(if yes,please show on plans and explain classification)
(This mostly has to do with electrical wiring)
***NOTICE***
All permits expire 180 days from the date of their issuance or the date of the last inspection. Expired permits will require
reactivation at such time that the responsible party decides to complete the project. Reactivation fees will be required on all
permits. Furthermore,any application that has not been issued or picked up after 180 days will become null and void.
"New commercial projects/and or additions with all the required submittals are not expected to exceed 4-6 weeks for the
initial review,but could take longer depending on needed revisions or current workload. Tenant improvements or remodels
are not expected to exceed 2-4 weeks,and Certificate of Occupancy only applications are not expected to exceed 1-2 weeks.
Please let the Building Department know if there are any unusual time constraints and we will wort:with you to move your
project forward as quickly as possible. Please keep in mind that any missing information from the below checklist will cause
delays in the processing of the permit application.
Commercial/Non-Residential/Multi-Family Plan Review Checklist
Notice to applicants: This checklist is designed to provide the basic information needed to allow the various agencies with
the City to complete a plan review of the proposed project. The basic requirements outlined below may not be all inclusive.
General Requirements for all plan submittals (to be FOR CONSTRUCTION):
1. Digital Plans: Plans saved (actual size pages will be printed) as PDF&combined together. We prefer plans to
be saved directly from CAD(instead of scanned) so the file is "intelligent". Digital signatures OK. 'Please call
front building desk 208-735-7238 to coordinate best way to transfer files for application.* OR...
2. Paper PlanS: Three complete sets of plans to include items below &a minimum of(two) original wet-
stamped sets are required.
CONSTRUCTION PLANS (NEW Construction, Additions & Remodels)
(DESIGN PF OFESSIONAL TO GO THROUGH LIST AND CHECK OFF THAT ALL REQUIREMENTS HAVE BEEN PROVIDED
d 1J�Y- N PLANS.) *'*MISSING ITEMS BELOW WILL DELAY ISSUANCE OF THE BUILDING PERMIT'
NA❑ CObEf PLAN ANALYSIS—Required information is detailed on the code Analysis form within the application.
❑ ComCheck Energy Analysis—Prepared by an Idaho licensed architect or engineer. (Required on remodel when changing
fixtures)(Include envelope,interior and exterior lighting&mechanical compliance worksheets)
NA ❑ Architectural Site Plan(This is REQUIRED in addition to the civil site plan)To include:
❑ Scale to be a minimum of 1/8"per foot for large projects and Y4"per foot for smaller ones.
❑ Sheet sizes shall not be less than 24"x 36"and not more than 30"x 42".
❑ Location of new and existing structures with fully dimensioned measurements to property lines&other structures;
❑ Parking lot design—Including fully dimensioned space and aisle layout and detailed handicapped parking spaces.
❑ Accessible route of travel from parking spaces to the building entrance and connecting to the public right-of-way.
Foundation Plan—(stamped by the Design Professional performing the structural calculations)
clude all required structural steel reinforcing,tie downs and special inspection criteria.
Floor Plan—Including all exit schemes,exterior wall openings,door swings,use designations,exit signage,location of fire extinguishers,
high pile storage areas. For tenant improvements or remodels,include floor plan of the entire building. Indicate the existing occupancies of
tenant spaces in contact with new tenant improvement or remodel.
11 AD EtEtavations—North,South, East,West(show building height dimensions)
BuiLy Iding Sections and Details—Including the room finishes for ceilings,walls and floors. Also,include schedules for all windows and
doors,indicating the type,size,safety glazing,and door hardware. UL Listings and details for fire separations. Provide fire stop material
specifications along with U.L.design details. Include sections of all walls showing height and how to be built.Also show any dropped down
clings or storage above ceilings and framing details.
L�f Structural Plans(stamped by the Design Professional performing the structural calculations)—Roof framing plan,floor framing plan,
header and beam schedules,strap locations,structural details,shear walls,shear wall schedule,lintels,lintel schedule and all other
structural information as indicated in the calculations or required by the Building Official.Any special details(i.e.,storage above restrooms)
Provide statement of special inspections per IBC 1704.1.1. A final report documenting required special inspections and correction of any
discrepancies noted in the inspections shall be submitted at a point in time agreed upon by the permit applicant and the building official prior
to the start of work.
Slb Conservation Elements—Insulation R-values,glazing U-Factors,glazing solar heat gain coefficient(SHGC)value,rough opening sizes.
14A 13 Electrical Plans—Exit signage,switching diagrams,lighting schedule with fixture,bulb and ballast type,number of bulbs per fixture,and
fixture wattage;exterior lighting bulb and ballast type,and type of control. Location of exit signage and emergency lighting shall coordinate
f��Mth the floor plan or the reflected ceiling plan. (list and give details of any classified areas)
echanical Plans—Equipment schedule listing the make and model of the equipment and other information pertinent to compliance with
IECC;duct insulation R-values,mechanical system control schematic load calculations. Information regarding all fire rated penetrations,
smoke dampers,fire dampers,etc. Ventilation design&calculations. Mechanical engineering plans may be required on certain projects.
r
(Provide calculations on plans if using natural instead of mechanical ventilation)
>� Plumbing Plans—Plumbing plan,isometrics,grease/sand interceptor details,and calculations to determine actual interceptor sizing
according to the requirements in the Uniform Plumbing Code. Be sure to include the sewer connection location,type and location of
reduced pressure backflow devices(s),gas line piping materials and calculations,water line piping layout and materials,and
drain/waste/vent piping layout and materials.
NAD MSDS Sheets—(2)Two copies of the Material Safety Data Sheets and the location and quantities of storage of such materials shall be
provided with the building permit submittal where any chemicals or hazardous materials may be present.
00 Structural Engineering Calculations—(2)two sets of Structural engineering calculations are required for all new construction,additions or
structural improvement/remodels/retrofits within existing buildings. Calculations must be stamped and signed by an Idaho Registered
^"/� Engineer or Architect. (Exception: parameters of section 2308 of the IBC 2012,and design will be required)
A0 Metal Building Drawings and Calculations—Metal Building Drawings and structural engineering calculations will be required for all pre-
fabricated metal buildings,including concrete footing details. Calculations must be stamped and signed by an Idaho Registered Engineer or
Architect.
PO Modular Buildings—Structural engineering calculations will be required for the foundation design for all modular buildings. Calculations
must be stamped and signed by an Idaho Registered Engineer or Architect. (Modular buildings are required to have Idaho Division of
Safety approval.)
/AO Additional Handicap Accessibility Information—Define all handicapped access features for new construction per the current
International Building Code,ANSI A 117.1. For remodeling and tenant improvements,the area of improvement shall comply with the
access requirement for new construction. An accessible route of travel will be required to the remodeled/improved area.
AMC Fire Department Requirements—Location and type of fire extinguishers,fire alarms,hoods,sprinkler system,etc.
40 Mechanical—HVAC Ventilation design IBC 1203.4(New as of 1-1-09)
❑ Provide statement of special inspections per IBC 1705.
AIAO Completed Waste Water Survey(see http://www.tfid.org/departments/p-z/building/133-building-information)
CIVIL PLANS(NEW CONSTRUCTION&ADDITIONS)'*'NOT TYPICALLY REQUIRED ON INTERIOR REMODELS"'
ivil Site Plan(Licensed Engineer or Architect required)—To include:
\� ❑ Scale and format to be standard scale at between 1:10 to 1:60 scale;
❑ Sheet sizes shall not be less that 18"by 24".
❑ Legal description and/or record of survey for the property and a vicinity map and north arrow;
❑ Property lines and lot dimensions and building setbacks from property lines
❑ Right-of-way details including access,easements,utilities,drainage,wastewater,right of way to be dedicated;
❑ Right-of-way improvements,both existing and proposed;
❑ Fire department access(access must be 20 feet wide with a 70,000 pound load capacity and reach within 150 feet of any/or all ❑
portions of the exterior walls of the building(s);
❑ Fire hydrants within 1000 feet&fire line location must be shown on the site plan;a water model may be required to determine fire
flow.
❑ Any areas used for the storage or use of materials regulated by the IFC;
❑ Storm Drainage—On site retention structure design and calculations by a P.E.;
❑ Grading plan including finished floor elevations,accessible route and top of curb elevations.
❑ Utility services—Number of water services including size and location;sewer location and proposed connection to the main;
irrigation service size and location,grease interceptor(including a detailed design)for all food service occupancies;
❑ Landscaping—Including all types and locations of landscape areas with topography showing berms,tree,fencing,retaining walls,
waterways,trash enclosure/mechanical equipment areas with method of screening,loading docks,storage areas,pedestrian
ways,exterior lighting fixtures,irrigation methods and proposed building pad; &storm water retention(City Code 10-11-2)
❑ Location of new and existing structures and distance between them.
❑ Parking lot layout,including fully dimensioned space&aisle layout,detailed handicapped parking spaces&accessible route
❑ Storm Drainage Calculations—To be stamped by an Idaho Registered Civil Engineer or Landscape Architect.
❑ Geotechnical report when building within 100'of canyon rim.
❑ Water tap size needed(or well permit,if applicable)
❑ Sewer lateral location
❑ Proposed and existing curb,gutter,sidewalk,and driveway approaches.
❑ Flood Plain indicated if within 100 year or less flood zone.
HEALTH DISTRICT APPROVAL IS REQUIRED FOR ALL BUILDINGS WHERE FOOD IS BEING PREPARED. A LETTER
OF APPROVAL MUST BE SUBMITTED TO THE BUILDING DEPARTMENT PRIOR TO PERMIT ISSUANCE.
/(the designer in responsible charge) (Architect or Engineer) hereby certify that/have read and examined the above
application and checklist, and that all of the information provided and items checked are included as part of the initial permit
application submittal and are true to the best of my knowledge.
Signature //I yuzy Date ' ZG �