HomeMy WebLinkAbout18-2221 925 Birchton Loop New House Permit C1TY f7F
Project Type: Residential Building Permit ��' Applied Date: 07I30/2018
Permit Type: Residential New Single Family Dwelling Issued Date: 08/08/2018
w
S�BviN�'
Permit No.: 18-2221
Address: 925 Birchton Loop
Owner Name: Steven S Miller Construction Contractor: Steven S Miller Construction
1201 Falls Ave E#22 1201 Falls Ave E#22
Twin Falls ID 83301 Twin Falls ID 83301
Phone: 208 308-5435
Contractor License/Registration# RCE-11949
Permit Information
Description of Work Single Family Dwelling W/Attached Garage
Property Location in City Limits Y � �
Lot N b umer B
Block Number 7
Subdivision Name Boradmoor
Number of Units
Sq. Ft First Floor 1616
_'Sq'..»Ft. Sec»:::». _._. :
and Floor
Sq. Ft. Basement Finished
Sq.Ft. Basement Unfinished
Sq »Ft. Garage 551
Sq. Ft. Patio 196
_Building Total Sq. Ft. 2,363.00
Project Value 153 ��
,11 520.00
Impact Fee Type— Residential(SFD/DUP)
Fee Date Description Qty/Hrs Fee City Amount Total
Waived
07/30/2018 Impact Fee Fire Residential 1.00 No 670.00 » 670.00
07/30/2018 Impact Fee Parks&Rec Res&Multi-Famil 1.00 No 632.00 632.00
07/30/2018 Impact Fee Police Residential 1 00 No 301 00 301.00
07/30/2018� Impact Fee Streets SFD » �-� 1 00 No 534.0'0 534.'00
07/30/2018 Permit Fee Residential City �» »_» � »» 153,520.00 No 11,165.00 1,165.00
07/30/2018 Plan Review Fee Residential City No 349.50 349.50
07/30/2018 Sewer Capacity Sinle'Family Dwellin No » 480.90 480.90
07/30/2018� Water 1"Meter No »296.48 296.48
Total Fees: 4,428.88
Payment Amount: 4,428.88
Amount Due: 0.00
This permit is not transferable(between contractors)and becomes null and void if work is not commenced within 180 days or is
abandoned for a period of 180 days.
Property Owners: By signing this form you are certifying that you are the legal owner and will personally perform the work covered by
this permit. You recognize that this permit is only valid for the work on a primary or secondary residence and associated outbuildings
not used for commercial purposes. By signing this,you accept responsibilitly for all work being performed,and understand that all
work must be inspected by the City of Twin Falls, Building Department.
Any work in the right-or-way requires a seperate permit from the Engineering Department. Please contact them at 208-735-7248.
Inspection Line Phone Numbers:
Building:208-735-7333 Electrical:208-735-7235 Mechanical:208-735-7289 Plumbing: 2088-.73�5-7299
Signature: Date: v� �
�k
)S
P
CITY OF
`WIN FALL
Project Type: Residential Building Permit Applied Date: 07/30/2018
Permit Type: Residential New Single Family Dwelling
OA OQ
<F SFRVIN�'Q�
Building Permit Application
Address: 925 Birchton Loop Permit No.: 18-2221
Owner Name: Steven S Miller Construction Contractor: Steven S Miller Construction
1201 Falls Ave E#22 1201 Falls Ave E#22
Twin Falls ID 83301 Twin Falls ID 83301
Phone: 208 308-5435
Contractor License/Registration# RCE-11949
Permit Information
Property Location in City Limits Y
Lot Number 6
Block Number 7
Subdivision Name Boradmoor ZONE: R-2
Number of Units 1.00 SEWER #: 18896
Sq. Ft. First Floor 1616 WATER #: 8599
Sq. Ft.Garage 551
Sq. Ft. Patio 196
Building Total Sq. Ft. 2,363.00
Project Value 153,520.00
Impact Fee Type Residential(SFD/DUP)
Fee Date Description Qty/Hrs Fee City Amount Total
Waived
07/30/2018 Impact Fee Fire Residential 1.00 No 670.00 670.00
07/30/2018 Impact Fee Police Residential 1.00 No 301.00 301.00
07/30/2018 Impact Fee Parks&Rec Res&Multi-Famil 1.00 No 632.00 632.00
07/30/2018 Impact Fee Streets SFD 1.00 No 534.00 534.00
07/30/2018 Permit Fee Residential City 153,520.00 No 1,165.00 1,165.00
07/30/2018 Water 1"Meter No 296.48 296.48
07/30/2018 Sewer Capacity Single Family Dwelling No 480.90 480.90
07/30/2018 Plan Review Fee Residential City No 349.50 349.50
Total Fees: 4,428.88
Payment Amount: 0.00
Amount Due: 4,428.88
Building Permit Application Only - This is not an approved permit
This application is not transferable and becomes null and void if work is not commenced within 180 days.
Property Owners: By signing this form you are certifying that you are the legal owner and will personally perform the work covered by
this permit. You recognize that this permit is only valid for the work on a primary or secondary residence and associated outbuildings
not used for commercial purposes. By signing this,you accept responsibilitly for all work being performed,and understand that all
work must be inspected by the City of Twin Falls, Building Department.
Signature: Date:
CITY OF
TWIN FALLS
if . City of Twin Falls
Building Department
F oQ4v 324 Hansen Street East Phone: 208-735-7238
P.O. Box 1907 Fax: 208-736-2256
SFRY�N� Twin Falls, ID 83303-1907 www.tfid.org
Residential Building Permit Application
"""All information to be filled out in its entirety or application will not be taken in"""
PROJECT INFORMATION
Project Address: 925 BIRCHTON LOOP
Subdivision BROADMOOR Lot: 6 Block: 7
PROPERTY OWNER INFORMATION CONTRACTOR INFORMATION
Name: Business Name: STEVEN S. MILLER CONSTRUCTION
Address: Address: 1201 FALLS AVE, SUITE 22
City, State,Zip: City, State,Zip: TWIN FALLS, IDAHO 83301
Phone: Phone: 208-308-5435
Fax: Fax:
Email: Email: SSMHOMES@GMAIL.COM
State Registration#
&Expiration Date:
PLAN DESIGNER/DRAFTSPERSON/ARCHITECT ADDITIONAL CONTACTS: Project Manager, etc.
Business Name: OWENS DESIGN Business Name:
Contact Name: LANE OWENS Contact Name:
Address: Address:
City, State,Zip: TWIN FALLS, IDAHO 83301 City, State,Zip:
Phone: 208-731-8737 Phone:
Email: Email:
Type of Permit Requested (This area to be completed by Designer) (Complete corresponding checklist)
OSingle Family Dwelling ❑Duplex ❑Zero Lot Line First Story: 1616 Sq. Ft.
❑Remodel/Repair/Egress Windows Second Story: Sq. Ft.
Description Basement Finished: Sq. Ft.
❑Addition Sq. Ft. Basement Unfinished: Sq. Ft.
Description Garage 551 Sq. Ft.
❑Detached Accessory Structure(shed>200 Sq.ft.) Sq.ft. Carport Sq. Ft.
❑ Misc. Fence/Pool/Deck Covered Porch/Patio 196 Sq. Ft.
Pool or Deck Sq. Ft.
Fire District(Area of Impact)—Total Cubic Feet Total Sq. Ft. 2363 Sq. Ft.
Project Value: $ 153,520.00
A. Project Value is used to calculate fees for the building permit. Project Value is the total value of the construction work
for which the permit is issued, including overhead and profit as well as finish work,painting,roofing, electrical,
plumbing,heating/air conditioning,elevators,fire extinguishing systems,other permanent equipment,and owner
supplied items. Project value excludes the value of the land.
B. I certify that the value&scope of work provided above are the most accurate available at this time:
Print Name Signature Date
Plan Submittal Requirements
Single Family Dwellings, Duplexes, Zero lot line, room additions, remodels, patio covers, accessory structures, etc.
• If submitting paper plans: 2 full sets of plans(Min. 18"x 24", Max 24"x 36") Min %"Scale on floor plans,
3/16"or 1"=S'for site plans (smaller paper may be allowed on small jobs).
• If submitting electronically:A PDF is required, save the PDF directly from the CAD file, instead of a scan if
possible. Submit plans and application to: buildingfax@tfid.org
NOTE: Impact Area Permits submit by one of the methods above along with South Central Public Health District
stamp & permit, Twin Falls Highway District Approach Permit, and cubit feet for fire area.
❖ Additional permits are required for any electrical(in city limits only), plumbing and mechanical installations.
❖ Permit applications are reviewed in the order in which they are received,so in order to avoid any delays make sure that all of the required
information is provided.
❖ When the structure is more than two stories in height, 10'single story,of an unusual design,or exceeds prescriptive code requirements,an
architect or licensed engineer is required to stamp the building plans and specifications.
❖ Plans to be designed to the 2012 IRC Code&2012 IECC.(with Idaho amendments)
❖ Provide cubic feet of fire area when building in the area of impact where no fire hydrants are present.
1. Is the property in a flood plain? ❑ Yes M No(If Yes attach Flood Plain No-Rise Certificate from Engineer)
2. Planning and Zoning Information R2
Land Use Zone
Is the property in the area of impact? ❑ Yes R No(If Yes and this a new construction or an addition,plans must be approved and
stamped by South Central Health District and must have a Twin Falls Highway District Approach Permit.)
3. Energy Code Compliance
Plans must be submitted demonstrating the Prescriptive Approach or the Performance Method approach for energy code compliance. In
marking the option below,and with all information attached to the plans, in signing this application, I declare that I am the permit
applicant/builder and that construction of the dwelling will be in compliance with all energy standards as adopted by the City of Twin Falls.
❑ Option 1: Performance Approach
A copy of the REScheck compliance report is attached to the plans. (This includes both the cover sheet and the
Inspection checklist.)
0 Option 2: Prescriptive Approach(R-38 Attic, R-20 Exterior Walls, R-30 Floors or R-13 perimeter walls, .35 U Value Lo-E windows)
***This option will need to be clearly shown on page 1 of plans.***
***An Energy Efficiency Certificate will be required to be posted in the electrical panel at final inspection***
4. Curb,Gutter,&Sidewalk
If your property does not currently have curb,gutter or sidewalk,you may be able to defer construction of these items if you are in an area
where these are non-existent. You will need a Warranty Deed showing proof of ownership,and we will notarize the deferral here at the
Building Department. This is not required if you are not adding more than 25%of existing square footage to property.
5. Fire Department Access&Fire Protection Plan(Area of Impact)
Show the location of the 20 foot fire department access road to within 150 feet to all exterior walls of the building. Show fire department
turn-a-round when the access road is longer than 150 feet. When there isn't a fire hydrant within 150'of residence, Residential buildings
exceeding 56,000 total cubic feet within the fire district will need to be: 1)divide the building with an approved fire wall,2)install water
storage for fire protection(NFPA1142),3)install an automatic fire sprinkler system,4)install a fire/smoke monitoring system.
***NOTICE***
All permits expire 180 days from the date of their issuance or the date of the last inspection. Expired permits will require reactivation at
such time that the responsible party decides to complete the project. Reactivation fees will be required on all permits. Please contact the
Building Official with any requests for reactivation or extension.
USE AND OCCUPANCY OF BUILDING
A Certificate of Occupancy will be issued upon completion of the project and after approval of final inspection. No occupancy is allowed until
issuance of the Certificate of Occupancy or Certificate of Completion. A temporary C of 0 can be issued for certain incomplete work under
extenuating circumstances(such as frozen ground)with$1000 refundable fee.
I CITY OF
1 �M
City of Twin Falls
Building Department
324 Hansen Street East Phone: 208-735-7238
<F e� P.O. Box 1907 Fax: 208-736-2256
SFRVtNG Twin Falls, ID 83303-1907 www.tfid.org
Residential New Home Checklist
*'*Designer: Please fill out and submit with application*
2 full sets of plans (Mn. 18"x 24",Nhx 24"x 36") Mn '/4"Scale on floor plans, 3/16"or 1"=5'for site plans
(smaller paper may be allowed on small jobs). Pages to be numbered and stapled. APDF is required for digital
plan review,including paper plans. Please save the PDF directly from the CAD file, instead of scan if possible.
Digital plans to be submitted to buildingfax i0d.org
NOTE: Impact Area requires 2 full sets of plans with South Central Public Health District stamp/permit and Twin
Falls Highway District Approach Permit. (This can be sent to us as a PDF as well).
Notice to all applicants: This checklist is designed to provide the basic information needed to allow the various agencies
within the city to complete a plan review ofthe proposed project. The basic requirements outlined below may not be all
inclusive. Check each item below as you complete it or mark N/Aifnot applicable.
Site Plan
0 Site plan typical scale 1:5 or 3/16". Can be drawn 1:10 or 1/8"when house or lot is very large.
Buildings shall be correctly oriented(no reverse plans),and be site specific.
8 Show orientation with north arrow
8 Show setbacks from structures to the property limes,lot dimensions and lot square footage.
8 Show location ofall existing and new structures(dimensions ofand between structures)on the site if applicable.
8 When building in the area of impact¬ in a subdivision,please include an aerial vicirrity map showing where the property is located.
BIndicate all easements for water,sewer line,utilities,access,etc.
8 Show all zoning setbacks(indicate location and dimensions).
8 Show all streets that border lot on site plan(ie.Comer lots or lots with street in front and back)
8 Show. (1)the storm water drainage system(typ.Arrows and grades),(2)the drainage from the building.(3)the retention areas.
(All drainage must be retained on lot&be maintained after landscaping)`Slope grade away from house,6"in 10'min."
BIndicate lot comers including finished grade&finished floor elevation. F.F.E.>/=15"min.above curb.
8 Show and dimension all existing and proposed concrete vwrk(patios,AC pads,sidewalks,driveways,curb&gutter,etc.)Note: Driveway's
to be hard surfaced.(SUd zone min.50'solid surface from roadway)
❑Submit`cell and septic tankpemrits,if applicable along with stamped site plan from SCDH
❑Fire District application—show the location ofthe 20 foot fire department access road to within 150 feet to all exterior walls ofthe building.
Show fire department tum-a-round when the access road is longer than 150 feet.
❑AccessorybuMings 3'minimum from property limes(1'eave overhang max). Also, 10'mininmm separation from house.
❑Twin Falls Highway District approach permit(ifbeing built in the Area ofhnpact)
Foundation/Floor Framing Plan
0 Foundation and required expanded footing shall include dimensions and reinforcement's type,size,and locations.
0 Detail insulation material types with notes as to R value,location and weather protection ofthemmal envelope for slab,foundation stems,
mono footings,crawlspaces and/or basement walls.
0 Hold-down types or other embedded hardware for flaming attachments,including locations.
D Indicate location of all foundation vents and sizes.(vent craw11:150)or show conditioned crawl space(to be noted on plans).
D Indicate location of crawl space access(s).
@ Cross section ofthe foundation and details. Show footing sizes,stem wall sizes&all rebar(quantity&sizes).
@ All floor joists are noted&with dimensions. Fusing 1-joists,please specify manufacturer&type&size ofI joist being used.
@ Show 30"clear in crawl space. Show over dig as applicable.
@ Show 15"min.width footings for bonus rooms&2 story walls.
@ Show damp proofing on all foundation walls.
@ Clearly note pony walls on plan that support bearing walls above.
❑Engineering may be required on spot footings when large point loads are present from girder truss loads above.
Floor Plan/Roof Framing Plan
@ Wmdow and door sizes,type and location. (N&rk all egress and tempered windows)
@ Show location ofsmoke detectors. (Inside each sleeping room,outside ofeach sleeping room and on each story ofa dw>1 ing.)
@ Carbon Nbnoxide Detectors outside all bedrooms(ifhouse contains fuel fire appliances,fireplace,or has an attached garage)
@ Wall Bracing Design(Exterior and interior)shall be clearly indicated and a schedule included which specifies the method ofbracing to be
used and the foundation attachments.(see IRC 602.10)(Design to be provided on a separate page&include dimensions to BWP's)
@ Label intended use for all rooms and ceiling heights of each room on floor plan.
❑Indicate location and types offire separations,(including detail and fiA LJL/GAListing)and constriction methods to be used.
@Provide square footage summaryofeach ofthe following:livable area,garage,carport,covered patios,shops,porches,and basement
(Finished or unfinished),and any other areas. (Dimensions based upon exterior of foundation).
@ Detail insulation material types with notes as to R value at the intersection of floor systems with exterior walls,crawl spaces,basement walls,
mass walls,and at conditioned space separation barriers.
@ Show 6 sided assembly detail in bonus rooms.(OBS against trusses,2x6 stud wall w/r-20 insulation,&sheetrock)
@ Floor framing plan,showing size ofheaders and all interior pony walls.
@ Show any interior bearing walls clearly on floor plan&roof framing plan.
@ Roof flaming plan. Showing truss layout,any interior bearing walls,girder truss locations,and header locations. Engineering will also be
required on job site from Truss manufacturer.
@ Provide actual truss layout&profiles from truss engineer on large and complex roofs.
@ Location,size and design ofbasement egress windowwells;including headers over windows and height from floor.
@ Size and location of attic access to any attic space>30"tall
@ Show how attic will be vented(if applicable).
@ Show bathroom exhaust fan or operable window.
*Construction details on all steps,stairs and landings.Provide cross section showing rise&nn,framing,handrails,and head clearance.
@ Size,type and location of all bearing beams and/or headers. Call out continuous headers ifusing any ofthe PORTALFRANE methods.
@ Energy Compliance Path(ResCheck current version)or indicate on Site Plan prescriptive method(showing all R values and types).
@ Aminimum ofone firlly di mnsioned building cross-sections from foundation to roofwith all materials specified. Include insulation baffles,
roof framing,roof sheathing,roof covering and roofpitch. Please include full cross section for 2 story houses showing both stories.
@ Exterior elevations(North,East,West&South sides)showing finish&height ofwalls.(Include height from grade to peak)
❑Provide Engineering if walls are over 10'tall. Engineering to be provided on stud size&spacing,shear(sheathing&nailing pattern),and
any additional tie downs or footing requirements. Calculations to be provided as well
❑Provide Engineering on any post and beam or pole barn structure. (Some exceptions may apply. See building department for details)
❑Provide Engineering for any steel posts or beams
@Nhimal S&J Calculations for HVAC system.*1\EWWfTH2009 CODE*(show fresh air in calculations)
New construction: Smoke detectors shall receive their primary power from the building wiring. They shall be interconnected for cross activation of
alarms and shall also be equipped with a battery backup.
Designer to sign application that they completed check off list:
Designer Signature