HomeMy WebLinkAbout20-2180 1854 Elizabeth Blvd #16 permit app CITY OF
Tom_ OF City of Twin Falls
Building Department
'~ v 203 Main Ave. E. Phone: 208-735-7238
P.O. Box 1907 Fax:208-736-2256
SeR�m° Twin Falls, ID 83303-1907 www.tfid.org
New or Addition Commercial Building Permit Application
Type of Permit Requested
✓❑New Complete Building Multi-Family(3 or more units) New Sq. Ft. 4776
❑Addition
OCommercial Site Plan-Buildable Lot Exist.Sq. Ft.
[]Shell Building-No Interior walls(no occupancy)
❑Shell Building-with interior walls(no occupancy) Total Cubic Feet (**Fire District Only**)
PROJECT INFORMATION Special Use Permit#:
Project Address: 1854 Elizabeth Blvd. Subdivision: Snyder Tract 6A, B and C
Business/Tenant using space: Lot/Block/
Parcel#:
Zoning District R-6 PUD/ZDA Name: Elizabeth Estates
PROPERTY OWNER INFORMATION CONTRACTOR INFORMATION
Business name: Elizabeth Properties LLC Business Name: Weathervane Homes
Contact naive: Gerald Martens Address:
Address: 621 N. College Rd Suite 100 City, State,Zip:
City, State,Zip: Twin Falls, ID 83301 Phone:
Phone: 208-734-4888 Fax:
Fax: 208-734-6049 Email:
Email: gmartens@ehminc.com State Registration#
&Expiration Date:
ARCHITECT INFORMATION ENGINEER INFORMATION
Business Naive: Business Name:
Contact Name: Contact Name:
Address: Address:
City,State,Zip: City, State,Zip:
Phone: Phone:
Fax: Fax:
Email: Email:
ADDITIONAL CONTACTS: Proiect Manager, other designers,contacts,etc
Business Name: Stockton Property Management Business Name:
Contact Name: Curtis Stockton Contact Name:
Address: 621 N. College Rd Suite 102 Address:
City, State,Zip: Twin Falls, ID 83301 City, State,Zip:
Phone: 208-9187540 Phone:
Fax: Fax:
Email: cestockton@gmail.com Email:
Effective April 2020
1. Project Description.• 4 Plex unit W/Managers office
2. Project Value: $ 335,000.00
A. Project Value is used to calculate fees for the building permit. Project Value is the total value of the construction
work for which the permit is issued,including overhead and profit as well as finish work,painting,roofing,
electrical,plumbing,heating,air conditioning,elevators,fire extinguishing systems,other permanent equipment,
and owner supplied items. Project value excludes the value of the land.
I certify that the value&scope of work provided above are a mosZac urate available at this time:
(applicant) Gerlad Martens 5/19/2020
�.� .•�-�---../
Print Name Signature Date
3. Planning&Zoning Info A. Land Use Zone: R-6 B. Parking Spaces
C. Req'd Landscaping provided SF#: see site plan D. Alcohol License?Yes or Nc
o E. Special Use permit required?Yes Oor NO O F. Building Height:
4. Engineering Info A. Flood Plain?Q yes nV no B. Site Drainage Area w/Calcs
B. Water Tap Size C. Sewer Tap Size
5. Building&Fire Info
***Attach a site-specific letter from the engineering department or other public water provider stating fire flow at hydrants.
Include static pressure if fire sprinklers are to be installed.***
A. Fire Flow:
B. Static Pressure:
C. Is there a fire alarm system? ❑✓Yes ❑NNo ❑Partial
D. Is the building fully fire sprinkled? ZYes ❑No ❑Partial
If yes,will the sprinklers be used for: Allowable Area Increase? ❑Yes W1No
Story Increase? ❑Yes 7✓ No
Fire-resistive Substitution? ❑Yes ❑No
If partially sprinklered,where?
E. Are there any classified areas per NFPA? ❑Yes ❑✓ No(if yes,please show on plans and explain classification)
F. Proposed Use residential G. Occupancy Class(s):
H. Construction Type: V-B 1. Building Height: 29'
J. Number of Stories: 2
***FYI...Fire sprinklers plans and Elevators plans to be submitted to the State for review.***
***NOTICE***
All permits expire 180 days from the date of their issuance or the date of the last inspection. Expired permits will require
reactivation at such time that the responsible party decides to complete the project. Reactivation fees will be required on all
permits. Furthermore,any application that has not been issued or picked up after 180 days will become null and void.
***New commercial projects/and or additions with all the required submittals are not expected to exceed 2-3 weeks for the
initial review,but could take longer depending on needed revisions or current workload. Please let the Building Department
know if there are any unusual time constraints and we will work with you to move your project forward as quickly as possible.
Please keep in mind that any missing information from the below checklist will cause delays in the review&processing of the
permit application.
Effective April 2020
General Requirements for all plan submittals (to be FOR CONSTRUCTION):
Digital Plans required for submittal: Save plans"to scale" (actual size pages will be printed) as a PDF& combine
together. We prefer plans to be saved directly from CAD (instead of scanned) so the file is"intelligent". Digital signatures
OK. *Please call front building desk 208.735.7238 to coordinate best way to transfer files for application.
Small files email to buildingfaxAtfid.org
(New &Addition) Commercial/Non-Residential/Multi-Family Plan Review Checklist
Notice to applicants: This checklist is designed to provide the basic information needed to allow the various agencies with
the City to complete a plan review of the proposed project. The basic requirements outlined below may not be all inclusive.
CONSTRUCTION PLANS (NEW Construction,Additions& Remodels)
***(DESIGN PROFESSIONAL TO GO THROUGH LIST AND CHECK OFF THAT ALL REQUIREMENTS HAVE BEEN PROVIDED
ON PLANS.) ***MISSING ITEMS BELOW WILL DELAY ISSUANCE OF THE BUILDING PERMIT,
Civil❑✓ Civil Site Plan(This is REQUIRED separate from the architectural site plan)To include:
Scale and format to be standard scale at between 1:10 to 1:60 scale;
[�Digital paper size typically 2436,but other sizes may be approved on a case by case basis.
egal description and/or record of survey for the property and a vicinity map w/north arrow.
JZ Property lines and lot dimensions,including minimum building setbacks from property lines to be clearly shown on site plan. We
ommend using a legend to clearly designate the different line types.
❑ Right-of-way details including access,easements, utilities,drainage,wastewater,right of way to be dedicated;
l Right-of-way improvements,both existing and proposed;along with right of way dedication according to the master transp.plan.
[Accessible route of travel from parking spaces to the building entrance and connecting to the public right-of-way.
Fire department all weather access(access must be 20 feet wide with a 75,000 pound load capacity and reach within 150 feet of
any/or all portions of the exterior walls of the building(s).
Fire hydrants within 1000 feet&fire line location must be shown on the site plan;a water model may be required to determine fire
flow. Identify existing and new.
Grading plan including finished floor elevations,accessible route and top of curb elevations.
Utility services—Number of water services including size and location;sewer location and proposed connection to the main;
irrigation service size and location,grease interceptor(including a detailed design)for all food service occupancies;
[�Parking lot layout,including fully dimensioned space&aisle layout,detailed handicapped parking spaces&accessible route from
right of way to entrance.
❑ Storm Drainage—Show on site retention design,and or waterways.
Storm Drainage Calculations—To be designed&stamped by an Idaho Registered Civil Engineer or Landscape Architect.
❑ Geotechnical report—when building within 100'of canyon rim. 50'closest allowed to canyon rim.
Water tap size needed(or well permit,if applicable)&location shown on plans.
�] Sewer lateral location,&sewer tap size.
[� All public water or sewer mains to have a 15'easement min.
0 Proposed and existing curb,gutter,sidewalk,and driveway approaches.
Flood Plain indicated if within 100 year or less flood zone.
❑✓ Architectural Site Plan(This is REQUIRED in addition to the civil site plan)To include:
✓❑ Scale typically 1/8"per foot for large projects and'/4"per foot for smaller ones. Other sizes allowed on a case by case basis.
✓❑ Location of new and existing structures and distance between them.
✓❑ Show any areas used for the storage or use of materials regulated by the IFC;
❑ Show required square footage of Landscaping—Including all types and locations of landscape areas showing berms,trees,bushes,
fencing,and retaining walls.
❑✓ Exterior lighting fixtures showing lumens per foot(City Code 10-114)
❑✓ Show all setbacks and easements including location of proposed building pad.
❑✓ Show trash enclosure/mechanical equipment areas with method of screening, loading docks,storage areas,&pedestrian ways.
0✓ Location of new and existing structures with fully dimensioned measurements to property lines&other structures;
❑✓ Parking lot design—Including fully dimensioned spaces, isles,and landscape islands per city code 10-10.
❑✓ If applicable...required improvements per SUP,PUD,ZDA,or HPC conditions.
❑✓ Drive thru isle with extra escape lane(if applicable).
Effective April 2020
❑✓ CODE/PLAN ANALYSIS—Required information is detailed on the example code Analysis form within the application. Example plans
analysis to only be used as a guide,and not the actual plans analysis.
❑✓ ComCheck Energy Analysis—Prepared by an Idaho licensed architect or engineer. (Include envelope,interior and exterior lighting&
mechanical compliance worksheets)Can be prescriptive or performance approach.
❑✓ Foundation Plan—(stamped by the Idaho licensed Design Professional performing the structural calculations)
Include all required structural steel reinforcing,tie downs and special inspection criteria.
❑✓ Floor Plan—Including all exit schemes,travel distances,exterior wall openings,door swings,use designations,exit signage, location of fire
extinguishers, high pile storage areas,and square footages. For tenant improvements or remodels, include floor plan of the entire building.
Indicate the existing occupancies of tenant spaces in contact with new tenant improvement or remodel.
❑✓ Elevations—North,South, East,West(show building height dimensions) *Indicate street side elevations for address numbers.`
❑✓ Building Sections and Details—Full exterior wall section from foundation to roof,interior wall section,&stair section. Including the roam
finishes for ceilings,walls and floors. Also,include schedules for all windows and doors, indicating the type,size,safety glazing,and door
hardware. Provide full UL or GA Listings and details for fire separations(not just the listing number). Provide fire stop material
specifications along with U.L.design details. Include sections of all walls showing height and how to be built.Also show any grid ceilings or
storage above ceilings and framing details.
❑✓ Structural Plans(stamped by the Design Professional performing the structural calculations)—Roof framing plan,floor framing plan,
header and beam schedules,strap locations,structural details,shear walls,shear wall schedule,lintels,lintel schedule and all other
structural information as indicated in the calculations or required by the Building Official.Any special details(i.e.,storage above restrooms)
❑✓ Foundation,Structural&Shear Engineering Calculations—Calculations must be stamped and signed by an Idaho Registered Engineer
or Architect. (Exception: prescriptive parameters of section 2308 of the IBC 2012,and design will be required). Required for:
❑ All new construction&additions.
❑ Metal buildings. Drawings and structural calc's will be required for all pre-fabricated metal buildings,including concrete footing details.
Calculations must be stamped and signed by an Idaho Registered Engineer or Architect.
❑ Modular buildings. Engineering calculations will be required for the foundation design for all modular buildings. Calculations must be
stamped and signed by an Idaho Engineer or Architect. (Modular buildings are required to have Idaho Division of Safety approval.)
❑✓ Conservation Elements—Insulation R-values,glazing U-Factors,glazing solar heat gain coefficient(SHGC)value,rough opening sizes.
❑✓ Electrical Plans—Exit signage,switching diagrams,lighting schedule with fixture,bulb and ballast type,number of bulbs per fixture,and
fixture wattage;exterior lighting bulb and ballast type,and type of control. Location of exit signage and emergency lighting shall coordinate
with the floor plan or the reflected ceiling plan.(list and give details/boundaries of any classified areas per NFPA&NEC)
❑✓ Mechanical Plans—Equipment schedule listing the make and model of the equipment and other information pertinent to compliance with
IECC;duct insulation R-values,mechanical system control schematic load calculations. Information regarding all fire rated penetrations,
smoke dampers,fire dampers,etc. Ventilation design&calculations. Mechanical engineering plans may be required on certain projects.
(Provide calculations on plans if using either natural instead or mechanical ventilation) See: IBC section 1203&IMC section 402&403
❑✓ Plumbing Plans—Plumbing plan, isometrics,grease/sand interceptor details,and calculations to determine actual interceptor sizing
according to the requirements in the Idaho State]Uniform Plumbing Code. Be sure to include the sewer connection location,type and
location of reduced pressure backflow devices(s),gas line piping materials and calculations,water line piping layout and materials,and
drain/waste/vent piping layout and materials.
❑✓ Additional Handicap Accessibility Information—Define accessibility access features for new construction per the current International
Building Code,ANSI Al 17.1. For remodeling and tenant improvements,the area of improvement shall comply with the access
requirements in the International Existing Building Code. An accessible route of travel will be required to the remodeled/improved area.
❑✓ Fire Department Requirements—Location and type of fire extinguishers,fire alarms,hoods,pull stations for hood, sprinkler system, riser
rooms,etc.
❑✓ MSDS Sheets—Completed Material Safety Data Sheets and the location and quantities of storage of such materials shall be provided with
the building permit submittal where any chemicals or hazardous materials may be present.
❑✓ Provide statement of special inspections per IBC 1704.1.1. A final report documenting required special inspections and correction of any
discrepancies noted in the inspections shall be submitted at a point in time agreed upon by the permit applicant and the building official prior
to the start of work.
❑✓ Completed Waste Water Survey(see survey in this application)
❑✓ Completed Sewer Capacity Fee Worksheet(see the form in this packet)
❑ HEALTH DISTRICT APPROVAL IS REQUIRED FOR ALL BUILDINGS WHERE FOOD IS BEING PREPARED. A LETTER OF
APPROVAL MUST BE SUBMITTED TO THE BUILDING DEPARTMENT PRIOR TO PERMIT ISSUANCE.
1 (the designer in responsible charge, Architect or Engineer) hereby certify that I have read and examined the above
application and checklist, and that all of the information provided and items checked are included as part of the initial permit
application submittal and are/�Me to the best of my k�weedge,
/ 1�1 A/ 5/19/2020
Signature J ' Date
Effective April 2020
City of Twin Falls
1. Company Name: Elizabeth Apartments
Mailing Address 621 N. Colelge Rd
Telephone: Fax:
Email: gmartens@ehminc.com
2. Facility Address: 1854 Elizabeth Blvd.
If same as above Check ❑
Telephone:
If same as above Check ❑
3. Contact Person: Gerald Martens Title: Owner
Telephone: 208-734-4888 Fax:
Email: gmartens@ehminc.com
4. Type of Business Please Check all that apply to activities at your place of business.
❑ Retail-describe type(to the right),
❑ Small Office-describe type(to the right)
IJ'you Checked either Retail or Small Office for your business type and none of the descriptions below apply to your business,please
answer Questions 5&6,and skip all other questions. Please be sure to sign and date this form prior to returning
❑ Motels/Hotels/Clubs ❑Schools/Colleges/Universities
Concern is efficiency of kitchen grease traps,frequency of clean out, Concern is efficiency of kitchen grease traps,frequency of clean out
disposal of grease. disposal of grease.
❑ Laboratory—Pharmacies ❑Laboratory—Commercial &
Concern is hazardous materials,disposal of chemicals,and potential Schools/Colleges/Universities
for spills. Concern is hazardous materials,disposal of chemicals,and potential
for spills.
❑ Hospitals ❑ Dental Clinics
❑ Doctor's Clinics ❑ Photo Shops
Concern is with silver recovery.
❑ Restaurants
Concern is efficiency of kitchen grease traps,frequency of clean out, ❑ Barrel Reelaimers
disposal of grease
❑ Print& Photo Copy ❑ Arts&Crafts Shops
Concern is with paints&glazes(ceramic&other).
❑ Garages/Full Service Gas Stations p Radiator Shops
Concern is flushing of antifreeze contaminated with metals.
❑ Paint& Body Shops ❑ Transportation Facilities
Concern is improper disposal of waste oils and inefficient grit traps.
❑ Industrial/Commercial Laundries ❑ Waste Haulers
Other—Describe principal activities or the nature of processes at the facility, in the space
provided below.
Multifamily housing
5. Number of Employees: N/A
6. Operating Schedule: hrslday N/A days/week
Effective April 2020
HAZARDOUS WASTE INFORMATION/NOTIFICATION(make copies&attach additional sheets if necessary)
Type of Discharge:
EPA Hazardous C—Continuous Describe Other
# Name of Waste Waste Number B—Batch,0-other
1
2
3
4
5
6
--------------
8
9
-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
10
If more than 100 Kilograms (220 pounds) of any hazardous waste per calendar month is discharged to the sewer, please
include the following items of information for each hazardous waste, to the extent such information is known and readily
available.
HAZARDOUS CONSTITUENT INFORMATION:
Concentration in
Name of Constituent Mass in Wastestream Wastestream Mass in Wastestream
(this month) (this month) (next 12 months)
----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Effective April 2020
SEWER CAPACITY FEE WORKS�HEET /
Business Name: �� 2 _ f/ "� Address: �6 5 L /, Z . �j�J J
1. Please indicate the number of new and exisiting plumbing fixtures in the appropriate boxes below.
2. Also, the number of holidays being closed, the number of days the business is open in a week, and how many hours open
during the day.
3. If no plumbing fixtures are bing installed, signify at the bottom of the form and sign.
4. Sign and date.
VALUES Number VALUES Number
New DFU/Unit Existing DFU / Unit
Lavatories 8 Lavatories
Water Closets 8 Water Closets
Urinal Urinal
Water Softener Water Softener
Hand Sink 4 Hand Sink
Dishwasher Dishwasher
Bar Sink Bar Sink
Clothes Washer 4 Clothes Washer
Kitchen Sink 4 Kitchen Sink
Shower 7 Shower
Drinking Fountain Drinking Fountain
Mop/Svice-Sk/Tr Dr Mop/Svice Sk/Tr Dr
Hose Bibb Hose Bibb Holidays
Laundry Sink Laundry Sink Days/Wk
Floor Drain/Sinks Floor Drain/Sinks Hrs/ Day
Swimming pool Swimming pool
Hot tub/whirl pool Hot tub
Other Other
*No plumbing fixtures are being installed. Initial
Signature below i icates all informatign provided for on this form is accur te.
� I
Name
Date 2e2d
Effective April 2020