The URL can be used to link to this page

Home My WebLink About17-1965 322 Addison Ave W Remodel Permit CITY OF Project Type: Commercial Building Permit TWIN FALL` _ Applied Date: 07/18/2017 Permit Type: Commercial Remodel Issued Date: 08/21/2017 r� <F SeRv�NG Q� Permit No.: 17-1965 Address: 348 Addison Ave W Owner Name: United Oil Contractor: Don Anderson Cons Inc 220 Eastland Dr S 2328 Eldridge Ave Twin Falls ID 83301 Twinfalls ID 83301 208-733-7033 Phone: 208 734-2164 Contractor License/Registration# RCE-2019 Permit Information Description of Work Interior&Exterior Remodel Property Location in City Limits Y Lot Number 1 Block Number 3 Subdivision Name Holohan Add Number of Units 1.00 Sq.Ft.First Floor 3572 _ Sq.Ft.Second Floor Sq.Ft.Basement Finished_ Sq.Ft.Basement Unfinished Sq.Ft.Garage Sq.Ft.Patio Building Total Sq.Ft. 3,572.00 Project Value 400,000.00 Impact Fee Type N/A Fee Date Description Qty/Hrs Fee City Amount Total Waived 07/18/2017 Permit Fee Commercial City_ 400,000.00 No 2,395.00 2,395.00 07/18/2017 Plan Review Fee Comm./18/2017 Plan Review Fee CommCity 1,556.75 1,556. 551,556.75 1,556. 55 Total Fees: 3,951.75 Payment Amount: 3,951.75 Amount Due: 0.00 This permit is not transferable(between contractors)and becomes null and void if work is not commenced within 180 days or is abandoned for a period of 180 days. Property Owners: By signing this form you are certifying that you are the legal owner and will personally perform the work covered by this permit. You recognize that this permit is only valid for the work on a primary or secondary residence and associated outbuildings not used for commercial purposes. By signing this,you accept responsibilitly for all work being performed,and understand that all work must be inspected by the City of Twin Falls, Building Department. Any work in the right-or-way requires a seperate permit from the Engineering Department. Please contact them at 208-735-7248. / Inspection Line Phone Numbers: i f Buil ing/208-735-7333 E ectrical:208-735-7235 Mechanical:208-735-7289 Plumbing:208-735-7299 Signature: "L/ Date: CITY OF Project Type: Commercial Building Permit `WIN FALLS Applied Date: 07/18/2017 Permit Type: Commercial Remodel �oA�F SERVING Q�0 Building Permit Application Address: 348 Addison Ave W Permit No.: 17-1965 Owner Name: United Oil Contractor: Don Anderson Cons Inc 220 Eastland Dr S 2328 Eldridge Ave Twin Falls ID 83301 Twinfalls ID 83301 208-733-7033 Phone: 208 734-2164 Contractor License/Registration# RCE-2019 Permit Information Property Location in City Limits Y Lot Number 1 Block Number 3 Subdivision Name Holohan Add Number of Units 1.00 Sq. Ft. First Floor 3572 Building Total Sq. Ft. 3,572.00 Project Value 400,000.00 Impact Fee Type N/A Fee Date Description Qty/Hrs Fee City Amount Total Waived 07/18/2017 Permit Fee Commercial City 400,000.00 No 2,395.00 2,395.00 07/18/2017 Plan Review Fee Comm. City No 1,556.75 1,556.75 Total Fees: 3,951.75 Payment Amount: 0.00 Amount Due: 3,951.75 Building Permit Application Only - This is not an approved permit This application is not transferable and becomes null and void if work is not commenced within 180 days. Property Owners: By signing this form you are certifying that you are the legal owner and will personally perform the work covered by this permit. You recognize that this permit is only valid for the work on a primary or secondary residence and associated outbuildings not used for commercial purposes. By signing this, you accept responsibilitly for all work being performed, and understand that all work must be inspected by the City of Twin Falls, Building Department. Signature: Date: City of Twin Falls Building Department 324 Hansen Street East Phone:208-735-7238 P.O.Box 1907 Fax:208-736-2256 Twin Falls,ID 83303-1907 www.tfid.org Commercial Building Permit Application Type of Permit Requested Date Received: ❑Commercial Site Plan-Buildable Lot Land Use: ❑New Complete Building ❑Multi-Family(3 or more units) Number of Units ❑Shell Building-No Interior walls(no occupancy) ❑Addition Sq.Ft. 3.5 7a ❑Shell Building-with:nlenor walls(no occupancy) >&model Total Cubic Feet " ❑Tenant Improvement in Shell Building Other ("Fire District Only") PROJECT INFORMATION Project Address: 3�S y��s�ti ADC-. Subdivision: tIGR. NAN AMMON Business/Tenant using space: UNITED 13l L Lot/Block: Phone-. Parcel#i: 3 PROPERTY OWNER INFORMATION CONTRACTOR INFORMATION Name; u( � Business Name: ' Address: ,._ Address: U City,State,Zip• 30 City,State,Zip: 5 O Phone. )-a S - M Phone: 3 L Fax: Fax: 908 - Q Email: Email:/41 State Registration# _ &Expiration Date: 11 I z`/ `� I? I ARCHITECT INFORMATION ENGINEER INFORMATION Business Name: Business Name: Contact Name: Contact Name: 6 u Address: Address: _&i_V, G0UE L - I II(- City,State,Zip: City,State,Zip. TIRN Phone: Phone: Fax: Fax: Email: Email: bowl$n 6jrn nc,ain ADDITIONAL CONTACTS: Project Manaeer, etc Business Name: Business Name: Contact Name: Contact Name.- Address: Address: City,State,Zip: City, State,Zip: Phone: Phone: Fax: Fax: Email: Email: I. Project Description: II IlG11Vl/G/llGI1V1 IGI I IVVGI 2. Project Value: $4001000 A. Project Value is used to calculate fees for the building permit. Project Value is the total value of the construction work for which the permit is issued,including overhead and profit as well as finish work,painting,roofing,electrical, plumbing,heating,air conditioning,elevators, fire extinguishing systems,other permanent equipment,and owner supplied items. Project value excludes the value of the land. I certify that the value&scope of work provided above are the most accurate available at this time: Print Name Signature Date 3. Planning&Zoning Information A. Land Use Zone: G-/ E. Warranty Deed B. Site Drainage Area with Calcs F. Flood Plain NO C. Landscaping Area �— G. Water Tap Size 9 _SM6 C_ D. Parking Spaces �� H. Sewer Tap Size 4. Building Information ft�C-t�.�IsPENSrn/G A. Proposed Use E.E.Tenant Improvement Area: _ B. Occupancy Groups: F.Total Existing Building Area: l a C. Construction Type: '— G. Actual New Building Area: D. Building Height: /9 H. Number of Stories: 5. Fire Information ***Attach a site-specific letter from the engineering department or other public water provider stating fire flow at hydrants. Include static pressure if fire sprinklers are to be installed.*** A. Fire Flow: B. Static Pressure: C. Is there a fire alarm system? Liyes No Partial D. Is the building fully fire sprinkled? n/e If yes,will the sprinklers be used for: Allowable Area Increase? EDYesQJo Story Increase? QYesOVo Fire-resistive Substitution? QYes QNo If partially sprinklered,where? E. Are there any classified areas? QYes QNo(if yes,please show on plans and explain classification) (This mostly has to do with electrical wiring) ***NOTICE*** All permits expire 180 days from the date of their issuance or the date of the last inspection. Expired permits will require reactivation at such time that the responsible party decides to complete the project. Reactivation fees will be required on all permits. Furthermore,any application that has not been issued or picked up after 180 days will become null and void. ***New commercial projects/and or additions with all the required submittals are not expected to exceed 4-6 weeks for the initial review,but could take longer depending on needed revisions or current workload. Tenant improvements or remodels are not expected to exceed 24 weeks,and Certificate of Occupancy only applications are not expected to exceed 1-2 weeks. Please let the Building Department know if there are any unusual time constraints and we will work%i ith you to move your project forward as quickly as possible. Please keep in mind that any missing information from the below checklist i0l cause delays in the processing of the permit application. Commercial/Non-Residential/Multi-Family Plan Review Checklist Notice to all applicants: This checklist is designed to provide the basic information needed to allow the various agencies with the City to complete a plan review of the proposed project. The basic requirements outlined below may not be all inclusive. General Requirements for all NEW CONSTRUCTION plan submittals: THREE COMPLETE SETS OF CONSTRUCTION PLANS TO INCLUDE CIVIL PLANS CONTAINED WITHIN) A minimum of two) original wet-stamped sets are required. CONSTRUCTION PLANS (NEW construction and Additions) **`(DESIGN PROFESSIONAL TO GO THROUGH LIST AND CHECK OFF THAT ALL REQUIREMENTS HAVE BEEN PROVIDED ON PLANS.) OCode Analysis-Required information is detailed on the code Analysis form within the application. Y" ComCheck Energy Analysis-Prepared by an Idaho licensed architect or engineer. (Required on remodel when changing fixtures)(Include envelope,interior and exterior lighting compliance worksheets) ❑ Architectural Site Plan(This is REQUIRED in addition to the civil site plan)To include: ❑ Scale to be a minimum of 118"per foot for large projects and Y,"per foot for smaller ones. O Sheet sizes shall not be less than 24"x 36"and not more than 30"x 42". ❑ Location of new and existing structures with fully dimensioned measurements to property lines&other structures; ❑ Parking lot design-Including fully dimensioned space and aisle layout and detailed handicapped parking spaces. ❑ Accessible route of travel from parking spaces to the building entrance and connecting to the public right-of-way. Foundation Plan-(stamped by the Design Professional performing the structural calculations) Include all required structural steel reinforcing,tie downs and special inspection criteria. Floor Plan-Including all exit schemes,exterior wall openings,door swings,use designations,exit signage,location of fire extinguishers, rr high pile storage areas. For tenant improvements or remodels,include floor plan of the entire building. Indicate the existing occupancies of tenant spaces in contact with new tenant improvement or remodel. [ -Elevations-North,South,East,West(show building height dimensions) Building Sections and Details-Including the room finishes for ceilings,walls and floors. Also,include schedules for all windows and doors,indicating the type,size,safety glazing,and door hardware. UL Listings and details for fire separations. Provide fire stop material specifications along with U.L.design details.Include sections of all walls showing height and how to be built.Also show any dropped down ceilings or storage above ceilings and framing details. -Structural Plans(stamped by the Design Professional performing the structural calculations)-Roof framing plan,floor framing plan, header and beam schedules,strap locations,structural details,shear walls, shear wall schedule,lintels,lintel schedule and all other structural information as indicated in the calculations or required by the Building Official.Any special details(i.e.,storage above restrooms) Provide statement of special inspections per IBC 1704.1.1. A final report documenting required special inspections and correction of any discrepancies noted in the inspections shall be submitted at a point in time agreed upon by the permit applicant and the building official prior to the start of work. lir Conservation Elements-Insulation R-values,glazing U-Factors,glazing solar heat gain coefficient(SHGC)value,rough opening sizes. OTIOI„ El Electrical Plans-Exit signage,switching diagrams,lighting schedule with fixture,bulb and ballast type,number of bulbs per fixture,and fixture wattage;exterior lighting bulb and ballast type,and type of control. Location of exit signage and emergency lighting shall coordinate with the floor plan or the reflected ceiling plan.(list and give details of any classified areas) 07?�MD Mechanical Plans-Equipment schedule listing the make and model of the equipment and other information pertinent to compliance with IECC;duct insulation R-values,mechanical system control schematic load calculations. Information regarding all fire rated penetrations, smoke dampers,fire dampers,etc. Ventilation design&calculations. Mechanical engineering plans may be required on certain projects. (Provide calculations on plans if using natural instead of mechanical ventilation) �j ❑ Plumbing Plans-Plumbing plan,isometrics,greaselsand interceptor details,and calculations to determine actual interceptor sizing according to the requirements in the Uniform Plumbing Code, Be sure to include the sewer connection location,type and location of reduced pressure backflow devices(s),gas fine piping materials and calculations,water line piping layout and materials,and drainlwastelvent piping layout and materials. ❑ MSDS Sheets-(2)Two copies of the Material Safety Data Sheets and the location and quantities of storage of such materials shall be provided with the building permit submittal where any chemicals or hazardous materials may be present. l� Structural Engineering Calculations-(2)two sets of Structural engineering calculations are required for all new construction,additions or / structural improvement/remodels/retrofits within existing buildings. Calculations must be stamped and signed by an Idaho Registered Engineer or Architect. (Exception: parameters of section 2308 of the IBC 2012,and design will be required) Metal Building Drawings and Calculations-Metal Building Drawings and structural engineering calculations will be required for all pre- fabricated metal buildings,including concrete footing details. Calculations must be stamped and signed by an Idaho Registered Engineer or Architect, g�•O Modular Buildings—Structural engineering calculations will be required for the foundation design for all modular buildings. Calculations must be stamped and signed by an Idaho Registered Engineer or Architect. (Modular buildings are required to have Idaho Division of Safety approval.) 'Additional Handicap Accessibility Information—Define all handicapped access features for new construction per the current International Building Code,ANSI A 117,1. For remodeling and tenant improvements,the area of improvement shall comply with the access requirement for new construction. An accessible route of travel will be required to the remodeledlimproved area. Fire Department Requirements—Location and type of fire extinguishers,fire alarms,hoods, sprinkler system,etc. 67f.1a�C Mechanical—HVAC Ventilation design IBC 1203.4(New as of 1-1-09) Provide statement of special inspections per IBC 1705. Completed Waste Water Survey(see http://www.tfid.org/departments/p-z/building/133-building-information) CIVIL PLANS(NEW CONSTRUCTION)(Civil plans may be required for ADDITIONS) • V 'Civil Site Plan(Licensed Engineer or Architect required}—To include: ❑ Scale and format to be standard scale at between 1:10 to 1:60 scale; ❑ Sheet sizes shall not be less_that_18"by 24 . O Legal description and/or record of survey for the property and a vicinity map and north arrow; O Property lines and lot dimensions and building setbacks from property lines ❑ Right-of-way details including access,easements, utilities,drainage,wastewater,right of way to be dedicated; ❑ Right-of-way improvements,both existing and proposed; ❑ Fire department access(access must be 20 feet wide with a 70,000 pound load capacity and reach within 150 feet of any/or all portions of the exterior walls of the building(s); ❑ Fire hydrants within 1000 feet&fire line location must be shown on the site plan;a water model may be required to determine fire flow. ❑ Any areas used for the storage or use of materials regulated by the IFC; ❑ Storm Drainage—On site retention structure design and calculations by a P.E_; ❑ Grading plan including finished floor elevations,accessible route and top of curb elevations. ❑ Utility services—Number of water services including size and location;sewer location and proposed connection to the main; irrigation service size and location,grease interceptor(including a detailed design)for all food service occupancies; ❑ Landscaping—Including all types and locations of landscape areas with topography showing berms,tree,fencing,retaining walls, waterways,trash enclosurelmechanical equipment areas with method of screening,loading docks,storage areas,pedestrian ways,exterior lighting fixtures,irrigation methods and proposed building pad;storm water retention(City Code 10-11-2) ❑ Location of new and existing structures and distance between them. ❑ Parking lot layout,including fully dimensioned space&aisle layout,detailed handicapped parking spaces&accessible route ❑ Storm Drainage Calculations—To be stamped by an Idaho Registered Civil Engineer or Landscape Architect. ❑ Geotechnical report—when building within 1 00'of canyon rim. ❑ Water tap size needed(or well permit,if applicable) ❑ Sewer lateral location ❑ Proposed and existing curb,gutter,sidewalk,and driveway approaches. ❑ Flood Plain indicated if within 100 year or less flood zone. HEALTH DISTRICT APPROVAL IS REQUIRED FOR ALL BUILDINGS WHERE FOOD IS BEING PREPARED. A LETTER OF APPROVAL MUST BE SUBMITTED TO THE BUILDING DEPARTMENT PRIOR TO PERMIT ISSUANCE. l (the designer in responsible char (Ar hitect or Engineer)hereby certify that l have read and examined the above application and checklist, and rmation provided and items checked are included as part of the initial permit application submittal and ar knowledge. 4 Signature I 4 !ate 7-4317 N CnmmDo r3uildinglApplknuuns '�RY�.t ***SAMPLE*** (may not be all inclusive) City of Twin Falls Plan Analysis Based on Latest Edition of IBC & IFC Architect or Engineer of Record:_( Y 86(MU N RE I✓- dd ENME-ERS I NG . Job Address: -2S AVD60N (City: M11N FAU6- St:—:1D—Zip: Legal Description: LOT "- --3 ILHAN AU U1 S. RJ7 Occupancy Classification: Occupant Load Per Area: 1: ,SCE 2: 3: / 4: 5: / 6: Number of Stories: Vestibule Req'd?: Yes: No: ✓ Total: (4 1 Floor Area: Basement: 151:3522 Exits Required: Basement: 151:� 2nd: 3rd: 4'h: 2nd: 3'd: 4th: stories Actually furthest travel distance to exit: (IBC Table 1016.1 &Table 1021.2) Type of Construction: �� _ Allowable Area Calcs: Area Increase: NA Sprinkler System: Yes: No:-X— Exit Signs: Yes: No: Maximum Floor Area Allowed: >%6t70 f:: - Emergency Lights: Yes:X No: Special Inspections Required?Yes:j No: Lighting Layout& ComCheck: Yes: No: Firewalls Required? Yes: No: X (If Yes, please provide cross section & UL Listing) Occupancy Separation Required? Yes: No: X (If Yes, please provide cross section &UL Listing) Area Separation Required? Yes: No: ><' (If Yes, please provide cross section & UL Listing) Classified Areas? Yes: No:-->L (If Yes, please show on plans and explain classification) FIRE HYDRANTS WITHIN 1000 FT. Comments: 1. ft. GPM Flow: 2. ft. GPM Flow: 3. ft. GPM Flow: Total: Minimum Req'd Flow for Building: �STE Qi Model Required?: Yes: No: Q�6 9FQ a Date: � � Prepared By: *""Fee may be accessed for water model""" �O Of '�ArD. ® CF42MHILL CH2M HILL P.O Box 515E Twin Falls,10 83303 5158 Tel 20a.734.9933 Fax 208.734.9937 Dear Wastewater Customer: The City of Twin Falls is required by the Environmental Protection Agency(EPA)to conduct a Wastewater Survey of the users within our service area. The reason for this survey is to determine if any wastewater discharged would be detrimental to the wastewater collection and treatment system or the treatment process. For purposes of notification, all industrial users (i.e., non-domestic users) are required to notify the Wastewater Treatment Facility of hazardous wastes in accordance with 40 CFR 403.12 (p).(See back of letter) We are asking that you please fill out the attached questionnaire as accurately and thoroughly as possible,and return it to us in the envelope provided within the month. Please make sure the name of the company, address and a contact person is included on the form. In the next few weeks after the survey has been submitted, you may be contacted by telephone or in person by a representative from CH2M HILL to answer any questions you may have and to gather any additional information we may need for this survey. If you have any questions, please contact Rebekka Bicart at 734-9933, or email"rbicart@ch2m.com". Thank you for your cooperation. Sincerely, Rebekka Bicart Industrial Pretreatment Coordinator CH2M HILL 40 CFR 403.12 p)(1)The Industrial User shall notify the POTW, the EPA Regional Waste Management Division Director, and State hazardous waste authorities in writing of any discharge into the POTW of a substance, which, if otherwise disposed of, would be a hazardous waste under 40 CFR part 261. Such notification must include the name of the hazardous waste as set forth in 40 CFR part 261, the EPA hazardous waste number, and the type of discharge (continuous, batch, or other). If the Industrial User discharges more than 100 kilograms of such waste per calendar month to the POTW, the notification shall also contain the following information to the extent such information is known and readily available to the Industrial User: An identification of the hazardous constituents contained in the wastes, an estimation of the mass and concentration of such constituents in the wastestream discharged during that calendar month,and an estimation of the mass of constituents in the wastestream expected to be discharged during the following twelve months. All notifications must take place within 180 days of the effective date of this rule. Industrial users who commence discharging after the effective date of this rule shall provide the notification no later than 180 days after the discharge of the listed or characteristic hazardous waste. Any notification under this paragraph need be submitted only once for each hazardous waste discharged. However, notifications of changed discharges must be submitted under 40 CFR 403.12 0). The notification requirement in this section does not apply to pollutants already reported under the self-monitoring requirements of 40 CFR 403.12 (b), (d), and (e). (2) Dischargers are exempt from the requirements of paragraph (p)(l) of this section during a calendar month in which they discharge no more than fifteen kilograms of hazardous wastes, unless the wastes are acute hazardous wastes as specified in 40 CFR 261.30(d)and 261.33(e). Discharge of more than fifteen kilograms of non-acute hazardous wastes in a calendar month, or of any quantity of acute hazardous wastes as specified in 40 CFR 261.30(d) and 261.33(e), requires a one-time notification. Subsequent months during which the Industrial User discharges more than such quantities of any hazardous waste do not require additional notification. (3)In the case of any new regulations under section 3001 of RCRA identifying additional characteristics of hazardous waste or listing any additional substance as a hazardous waste, the Industrial User must notify the POTW, the EPA Regional Waste Management Waste Division Director, and State hazardous waste authorities of the discharge of such substance within 90 days of the effective date of such regulations. (4) In the case of any notification made under paragraph(p)of this section,the Industrial User shall certify that it has a program in place to reduce the volume and toxicity of hazardous wastes generated to the degree it has determined to be economically practical. For links to 40 CFR regulations go to www.gpoaccess.gov and click on Code of Federal Regulations. Wastewater Survey City of Twin Falls 1. Company Name: Mailing Address Telephone: Fax: Email: z. Facility Address: �,YQ ApVt_-5 1V WE— U1. If same as above Check ,❑ Telephone: If same as above Check 17 3. Contact Person: Title: Telephone: Fax: Email: 4. Type of Business Please Check all that apply to activities at your place of business. i Retail—describe type(to the right), F-UC I-S WNS1M- MLLCAN71cIE- ❑ Small Office—describe type(to the right) lfyou Checked either Retail or Snrall Office for your business tyre and none of the descriptions below apply to your business,please ansrver Questions 5&6,and skip all other questions. Please he.sure trr sign and date this form prior to returning ❑ Motels/Hotels/Clubs ❑ Schools/Colleges/Universities Concern is efficiency of kitchen grease traps,frequency of clean out, Concern is efficiency of kitchen grease traps,frequency of clean ouf, disposal of grease. disposal of grease. ❑ ❑ Laboratory—Commercial & Laboratory—Pharmacies Schools/Colleges/Universities Concern is hazardous materials,disposal of chemicals,and potential for spills. Concern is hazardous materials,disposal of chemicals,andpotential for spills. ❑ Hospitals ❑ Dental Clinics ❑ Doctor's Clinics ❑ Photo Shops Concern is with silver recovery. ❑ Restaurants Concern is efficiency of kitchen grease traps,frequency of clean out, ❑ Barrel Reclaimers disposal of grease ❑ Print& Photo Copy ❑ Arts & Crafts Shops Concern is with paints d glazes(ceramic d other). ❑ Garages/Full Service Gas Stations ❑ Radiator Shops Concern is flushing of antifreeze contaminated with metals. ❑ Paint&Body Shops ❑ Transportation Facilities Concern is Improper disposal of waste oils and inefficient grit traps, ❑ Industrial!Commercial Laundries ❑ Waste Haulers Other— Describe principal activities or the nature of processes at the facility,in the space provided below. 7. Standard Industrial Classification Code Number(s)and Classification(s)(ifknown): 8. Average total monthly water usage In gallons(monthly waterblllings will usually show this). 9. Is the building presently hooked to the sewer system? 12TY =N 10 Are there floor drains present at your facility? DY MN 11. Do you or will you use non-petroleum fats,oils or greases(cooking types of oU/grease)in y business? Y �N 12. Do you or will you use petroleum oils or greases in your business? 0 Y ON 13. Grease trap present? =Y ON 14. Describe any pretreatment facilities or practices used to remove pollutants or protect the sewer. 15. Do you or will you store or use chemicals on site in excess of household quantities? =Y =N 16. Do you or will you discharge wastewater(other than domestic wastes from toilets,showers,etc.)to the=Y ON sewer system? 17. Do you or will you have an Accidental Spill Prevention Plan(ASPP)for your business? =Y =N I certify that the information in this questionnaire is to the best of my knowledge true and complete. [This statement must be signed by an official authorized to sign for the company.] Signature: Date Print Name. OFFICE USE ONLY Additional information required? Need to schedule site visit or other follow-up? 0 Y 0 N Need to send an Industrial User permit application? =Y N HAZARDOUS WASTE INFORMATION/NOTIFICATION(make copies&attach additional sheets itnecessary) Type of Discharge: Name of Waste EPA Hazardous C—Conrnuous Describe Other # Waste Numbe B—Batch,0-other 1 2 3 4 5 6 7 8 9 10 If more than 100 Kilograms (220 pounds)of any hazardous waste per calendar month is discharged to the sewer, please include the following items of information for each hazardous waste, to the extent such information is known and readily available. HAZARDOUS CONSTITUENT INFORMATION: Concentration h Name of Constituent Mass in Wastestream Wastestream Mass in Wastestream this month this month _Lnext 12 monthsl SEWER CAPACITY FEE WORKSHEET Business Name: U N ITEL 61 L Address: 3 q$ APDI56N AVt—:,W,- 9. Please indicate the number of new and exisiting plumbing fixtures in the appropriate boxes below. 2. Also, the number of holidays being closed, the number of days the business is open in a week, and how many hours open during the day. 3. If no plumbing fixtures are bing installed, signify at the bottom of the form and sign. 4. Sign and date. VALUES Number VALUES Number New DFU/Unit Existing DFU/Unit Lavatories Lavatories aZ Water Closets 3 Water Closets 13 Urinal O Urinal t Water Softener Water Softener Hand Sink Hand Sink v� Dishwasher Dishwasher Bar Sink j Bar Sink Clothes Washer Clothes Washer Kitchen Sink Kitchen Sink Shower Shower Drinking Fountain Drinking Fountain Mo /Svice-Sk/Tr Dr Mo /Svice Sk/Tr Dr Hose Bibb Hose Bibb Holidays Laund Sink Laundry Sink Da s/Wk Floor Drain/Sinks Floor Drain/Sinks Hrs/Da Swimming pool Swimming pool Hot tub/whirl pool Hot tub Other Other 'No plumbing fixtures are being installed. Initial Signature below indicates all information provided for on this form is accurate. Name Date 7--13/7 10-4-8.3:C1; Comm ercialHighway District Develop ment Standards By Zone Permit Number 17-1965 Property Address 322 Addison Ave W IegalDescription Lo t: 1 Blk: Subdivision: Holohan Addition New Bldg Interior Remodel United Oil Change ofUse X Zoning: C-1 PUD/ZDA Document# 10-4-8.3:C1; CommercialHighway District N/A Pending Approved Comments (A) Lot Area: 1. CommercialUses: 'Ihe lot area shallbe of sufficient size to provide forthe building, the required setbacks, off D ❑ Fv-1 stre e t p a rking and landscaping. 2. Residential Use s:Residential use slessthanfive (5)units and not attached to a commercialuse shallprovide the ❑ ❑ minimum lot area of the R6 district. (B) Lot Occupancy: 1. Commerc ia lUse s:No requirement. D E ❑ 2. Residential Use s:Residential use slessthanfive (5)units not attached to a commercialuse shallconform to the lot ❑ ❑ ❑ occupancy requirements of the R6 district. (Ord. 2526, 5-20-1996) (C) Building Height: No building shallexceed fifty feet (50') in height except as El ❑ 20' provided by section 10-7=3 of this title. 1of3 10-4-8.3:C1; Comm ercialHighway District N/A Pending Approved Comments (D) Yards: Front yards shallconform to the following standards, or Not expanding building. This building is legal se c tion 10-7-6 of this title,whichever is gre a to r: El F-1 ✓� non-conforming. It sits within the 93' centerline setback. 1. Commerc ia lUse s And Re sidentia lUse s With Five Or More UnitsPerBuilding: ❑ ❑ a. Front Yards:A setback ofthirty five feet (35') shallbe Not expanding building. This building is legal maintained on majorarterials and fifteen feet (15') on all ❑ ❑ non-conforming. It sits within the 35' property other streets. In developed areaswhich have building line setback. lines already established,this requirement maybe reviewed and adjusted bythe commission, subject to the following exceptions: (1)Agasoline service stationpump island, including cashier'sbooth, and canopy setbackmaybe lessthan the required thirtyfive feet (35')property line setbackon arterialstreets,providing the property line setback is not ❑ ❑ less than thirty feet (30') fora pump island norlessthan Fv_1 twenty feet (20') forthe outeredge ofa canopy. Gasohne service station pump islands, including cashier's booths, and canopies, shallnotbe used to adjust setbacks in developed areaswhich have building linesalready established. (2) Outdoororpatio seating, including associated canopies orcoverings, at a food service establishment providing the outdoorseating area including any ❑ F-1 canopies orcoverings does not exceed a propertyline setback of twenty feet (20') orthe minimum required arteriallandscaping is p rovid e d,whic he ve r is g re a te r. Any outdoororpatio seating area proposed within a required setbackmustbe approved bythe planning and zoning commission. 2of3 10-4-8.3:C1; Comm ercialHighway District N/A Pending Approved Comments (D) Ya rd s: b. Side And Rear Yards:No property line setbacks are required on side yard orrearyards when adjacent to existing commercial use s, existing residential use swith five (5) ormore units perbuilding,vacant property that is zoned for nonre side ntia Idevelopment, orvacant property that is designated on the future land use plan for nonresidentialdevelopment.A property line setbackof ❑ ❑ twenty five feet (25') shallbe maintained on the side yard and rearyard forbuildings adjacent to existing residential uses with four(4) orfewerunitsperbuilding,vacant property that is zoned forresidentialdevelopmentor vacant property that is designated onthe future land use plan forresidentialdevelopment. 2. Residential Use s:Residential use slessthanfive (5)units and not attached to a commercialuse shallconform to ❑ ❑ the yard standards ofthe R6 district. (Ord. 3077, 8-11-2014) (E) Access: Alllotsshallhave vehicularaccesson a dedicated improved public street with a fifty foot (50') minimum right D F ofwayunlessa secondary means of permanent vehicular access has been approved on a subdivision plat. (F) Landscaping: 1. Commercialuses shallprovide landscaping equalto D ❑ ❑ Addison Ave W: 1740 sf; 4 trees, 18 bushes & ten percent (10%) ofthe totalrequired parking area or berm. remainder: 2218 sf; 5 trees, 23 bushes, three percent (3%) ofthe totalland area,whicheveris 1/2 evergreen greater. 2. Household buildings overfive (5)unitsshallprovide landscaping equalto ten percent (10%) ofthe lot area. ZI 1:1 ❑ 3 of 3